Production Facility for RPF Fuel from Waste
K Co., Kyoto, Japan
 |
100 tonnes per day RPF produced here is utilised by paper and steel mills as boiler fuel |
|---|
| Twin Shaft Crusher Varila |
⇒ | Magnet Separator |
⇒ | Metal Detection and removal |
⇒ | Single Shaft Shredder Ichijiku |
⇒ | Dosing Feeder |
⇒ | Compression&Solidification Fuji Pax |
⇒ | Screen and water type cooler |
⇒ | RPF product |
 |
Varila, model SG480N, flex conveyor and drum magnet separator |
|---|---|
| ・Material is infed to a Twin Shaft Crusher - Varila Drum magnet separator removes ferrous metal particles |
|
 |
Manual separation and metal dettector |
| ・Manual separation and metals line, where non-ferrous metals, stones and other "unwelcome" foreign objects are removed |
|
 |
Ichijiku, model SM2370 (2 shredders installed and running) |
| ・AnIchijiku, Single Shaft Shredder is used at this stage to further shred the waste to a uniform size. | |
 |
Dosing Feeder and Fujipax, model PF4000D (2 machines) |
| ・To produce pellets with just the right combustion properties, the mix (plastics to paper ration) is determined and adjusted at this stage and fed into the Fujipax Compression&Solidification『Fujipax』 for the production of RPF. | |
 |
Vibration Screen and water type Cooler |
| ・Dust is screened from the RPF here with a Vibrating Screen, model VL305H. , then put through a water type cooler to bring the temperature of the pellets below 40 degrees celcius. | |
 |
RPF Product Yard |
| ・As plastics are the main component, calorific value is high | |
 |
Central Control Room |
| ・Cameras and large screen monitors show all areas of the plant |
| Back to "Selected Plant Examples" index | Waste Compression - show me the next plant |