FujiPax
《 Use 》
- Waste plastic, wood, straw, paper, textile, leather, and rubber
Compression and Solidification - for producing RDF or RPF (Refuse Paper & Plastic )!
《 Features 》
- Less smell and less noise
- Simple structure and easy maintenance
- Safety and simplicity in operation
- Low running cost
- Large volume reduction ratio
《 Option 》
| Nozzles cleaning device（option） | ||
| When nozzles are clogged with foreign material, over-load sensor detects
it, and the screws reverse, and then, the nozzle cleaning device eliminate the foreign material. This can be easily done by pressing the butom and can save a lot of time required for cleaning. |
 |
 |
《 A processing example 》
| Waste mateials | Shredded by one-rotor shredder | Compression & solidification waste. | |||
|---|---|---|---|---|---|
| Card board & Vinyle sheet |
 |
 |
 |
|
 |
| Poly-propylene & non-woven fablic |
 |
|
 |
|
 |
| Model | PF1000G | PF2000C | PＦ3000D | PF4000F | |
|---|---|---|---|---|---|
| Capacity（kg/h) | approx 700～1000 | approx 1500～2000 | approx 2500～3000 | approx 3000～3500 | |
| Power (kW) |
Main parts | 110～132kW×6P | 200kW×4P | 300kW×4P | 375ｋW×4P |
| heater | 20kW | 25kW | 36kW | 36ｋW | |
| cutter | 2.2kW×4P | 2.2kW×4P | 3.7kW×4P | 3.7ｋW×4P | |
| cleaning device （hydoraulic unit） |
1.5kW | 1.5kW | 3.7ｋW | 3.7ｋW | |
| Diameter & screws (mm) | Φ370mm×twin shaft | Φ420mm×twin shaft | Φ530mm×twin shaft | Φ570mm×twin shaft | |
| in-feed spout (mm) | 260mm x 500mm | 370mm x 780mm | 390mm x 920mm | 390mm x 730mm | |
| Product Size (mm) | 30 - 40mm diameter | ||||
Back to the "Product Lineup" page